This APP was formerly know as "Feeds and Speeds for Milling" and "Pro Speeds and Feeds" This is an updated version equivalent to the pay "Pro Speeds and Feeds" but is now FREE!
This app has no ads!
Speeds & Feeds for Milling comes pre-loaded with lots of materials, but will also allow you to add, delete and modify any and all materials. Don’t like the numbers you get with the stock settings, then change them, It’s that simple.
Currently supports standard square end mills making peripheral cuts.
Speeds & Feeds for Milling is not just another milling calculator, but something much more. This calculator will give you the basic spindle RPM and feed rate based on the type of cutter and material being machined. Just tell it about your end mill, the material being cut, and max feed rate and horsepower of you CNC/machine... and Speeds and Feeds will tell you what RPM, feed rate in IPM, radial width of cut, and axial depth per pass for both roughing and finishing. All based on your machines capabilities. Feeds and Speeds will automatically adjust the feed and cut depths to stay within your specified machine horsepower. No need to look up chip loads or power factors. Speeds and Feeds is loaded with all the basic machining materials... and then some.
"This is the most useful speeds and feeds I’ve seen, great job"
- Mike
The following materials are supported.
Aluminum 6061 T1-T3, Aluminum 6061 T4-T6, Aluminum 2024, Aluminum 7075, Aluminum Billet, Aluminum Cast, Brass Free Cutting, Brass Wrought, Bronze, Copper, Iron Hard, Iron Soft, Magnesium Alloy, Plastic Acetal, Plastic Nylon, Plastic PVC, G10 Fiberglass/Polyester, Graphite, Graphite Fiber/Epoxy, Stainless 15-5 / 17-4 ph, Stainless 303, Stainless 440c, Stainless 304, Stainless 316, Steel 1018-1020, Steel 4130, Steel 4140, Steel 4340, Tool Steel A2, Tool Steel D2, Tool Steel H13, Tool Steel P20, Titanium Comm Pure, Titanium 6al-4v, Titanium 6al-6v, Inconel, Nitralloy N-315, and more.
This program gives basic feed and speed calculations. It is up to the user to determine if they are correct for each individual application and to make adjustments as needed. Use of the calculations provided may result in broken tooling and/or machine damage. Use at your own risk. No warranty is given or implied.
[email protected]
Feeds & Speeds for Milling is an Android Tools app developed by CamUser and published on the Google play store. It has gained around 50000 installs so far, with an average rating of 3.0 out of 5 in the play store.
Feeds & Speeds for Milling requires Android with an OS version of 1.6 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. Feeds & Speeds for Milling is an Android app and cannot be installed on Windows PC or MAC directly.
Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.
Below you will find how to install and run Feeds & Speeds for Milling on PC:
If you follow the above steps correctly, you should have the Feeds & Speeds for Milling ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.
| Feeds & Speeds for Milling APK 9.0 | 1.44 MB | 9.0 |
RELATED APPS
