PTSection was developed by PT Suppliers to provide the engineer with state-of-the-art analysis of prestressed sections (post-tensioned or pre-tensioned). The section could be rectangular, T or slab strips. The application is based on the transformed properties of the section and the stresses are calculated using compatibility of strains and the Bernoulli assumption of plane sections. PTSection calculates the stresses at the top and bottom of the section for service load conditions, including initial load at the onset of prestress load transfer. It is assumed that the section remain uncracked under these load conditions. ACI 318-2014 allowable stress conditions are checked against the applied stresses.
Features:
.SI units (mm, kN, m, MPa)
.Calculation of C.G for the gross and transformed section
.Calculation of Self-weight, which could be used to get appropriate Moments, Axial loads applied to the section
.Application of Dead and Live moments and axial load (tension +) for each service load type
.Stress check per ACI 318-2014 for "Initial", "Total Service Load", and "Sustained Load"
.Prestresses steel (active) can be located at any distance along the height of the section.
.Forces in prestressed (active) reinforcement are based on the estimated stress after all losses occur for Total and Sustained service loads.
.Prestressed forces for the "Initial" load are calculated assuming the stress at transfer to be 0.80 of the ultimate stress in the active steel.
.Estimation of required post-tensioned reinforcement based on applied service loads.
Future developments:
.Calculation of Moment capacity for service and strength conditions
This is the only application in any app store for PT Sections. Visit us at www.ptsuppliers.com for information on our products and services.
Prestressed Concrete Analysis is an Android Tools app developed by PT Suppliers and published on the Google play store. It has gained around 1000 installs so far, with an average rating of 4.0 out of 5 in the play store.
Prestressed Concrete Analysis requires Android with an OS version of 1.6 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. Prestressed Concrete Analysis is an Android app and cannot be installed on Windows PC or MAC directly.
Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.
Below you will find how to install and run Prestressed Concrete Analysis on PC:
If you follow the above steps correctly, you should have the Prestressed Concrete Analysis ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.
| Prestressed Concrete Analysis APK 1.04 | 1.74 MB | 1.04 |
RELATED APPS
