Becareful!! Read the information below and you need to download examples on Github: https://github.com/S2I71/usb_otg_bridge_app_inventor/
Demo: Try it before buying the full app but a screen display with 10 secondes delay between each comunication. Baudrate at 115200.
Full Version :
Possibility to change BaudeRate: BAUD300,600,...57600,115200... en App inventor 2
No screen with tempo ; transparent bridge .
https://play.google.com/store/apps/details?id=bp.usbbridge.appinv
Create in 10 minutes your application on your android tablet that communicates with your Arduino USB board.
Download the following example: https://github.com/S2I71/usb_otg_bridge_app_inventor/
Students, teachers, passionate communication discover the first application to control devices FTDI UART with USB connector (Arduino Uno, Mega, Yun, FTDI XBee ...) directly from the development tool APP INVENTOR 2 . (No need for extra Host Shield or Bluetooth. All you need is a Micro USB OTG to USB Adapter.)
USB Bridge for App Inventor 2 allows through a USB OTG cable to achieve a seamless interface between a USB device and the development tool APP INVENTOR 2.
You'll be able to develop your own new applications using the power of app inventor 2 (graphic, sensors, databases ...) and the powers of your devices available (LED RGB, Servo, AX12A, DC Motor...) equipped with a USB UART at 115200 bauds
Use and recycle your old phone using its internal functions instead of using multiple Arduino shield: touch screen display, MP3 player, SD card reader, SMS sending, GPD, GSM,QR Codes, NFC, bluetooth, wifi, various sensors .. .. for your microcontroller based applications. (Arduino, Teensy, XBee ...)
If your device is not recognized, please send me the references Vendor ID and Product ID as the following example to the arduino uno: Vendor ID: 0x2341, Product ID: 0x0001
USB Host mode support on android device and Android 3.1+ are required
Example:Control an arduino uno card with otg usb and APP INVENTOR 2
(Test OK 115200 bauds with an arduino méga ADK board)
In the demo version juste change in app inventor the start activity like this:
change : bp.usbbridge.appinv to bp.usbbridge.appinvDemo
and : bp.usb.bridge.appinventor to bp.usb.bridge.appinventorDemo
Send and receive datas from Arduino with Serial.println(), Serial.print() , Serial.read() in 115200 baud rate or other (full version).
Version Arduino program with Ardublock
https://github.com/S2I71/usb_otg_bridge_app_inventor/
USB Bridge App Inventor 2 Demo is an Android Tools app developed by Perraud Bruno and published on the Google play store. It has gained around 5000 installs so far, with an average rating of 2.0 out of 5 in the play store.
USB Bridge App Inventor 2 Demo requires Android with an OS version of 3.1 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. USB Bridge App Inventor 2 Demo is an Android app and cannot be installed on Windows PC or MAC directly.
Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.
Below you will find how to install and run USB Bridge App Inventor 2 Demo on PC:
If you follow the above steps correctly, you should have the USB Bridge App Inventor 2 Demo ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.
| USB Bridge App Inventor 2 Demo APK 1.4 | 142.04 KB | 1.4 |
RELATED APPS
