A tool runs on Android platform to create an IoT project easy.
Makes it easy to upload binary file (result of compiled Arduino IDE) to any Expressif ESP8266 development board via USB OTG or WiFi (OTA).
Features:
★ Upload/Flash bianry file via USB OTG
★ Upload/Flash bianry file via WiFi (OTA)
★ Support any USB chip: CDC/ACM, FTDI, PL2303, CH34X and CP210X
★ Serial Monitor for debuging
★ Change the Blynk token, SSID & password automatically durring upload
★ No Ads (Pro version)
★ Access to Google Drive storage (Pro version)
★ Multiple upload widgets button (Pro version)
Note:
- Your device must support USB Host OTG, otherwise the program will not work
- Use good quality OTG adapter/cable, otherwise the uploading failure
- If you get error: "Failed download. Check network connection." You can try to download the required file manually from this link: https://github.com/bluino/ESP8266Loader and https://github.com/bluino/ESP8266Loader_extra, then extract it to internal storage, so that you will have the /sdcard/ESP8266Loader folder.
ESP8266 Loader - IoT is an Android Tools app developed by Bluino Electronics and published on the Google play store. It has gained around 5000 installs so far, with an average rating of 4.0 out of 5 in the play store.
ESP8266 Loader - IoT requires Android with an OS version of 4.0.3 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. ESP8266 Loader - IoT is an Android app and cannot be installed on Windows PC or MAC directly.
Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.
Below you will find how to install and run ESP8266 Loader - IoT on PC:
If you follow the above steps correctly, you should have the ESP8266 Loader - IoT ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.
ESP8266 Loader APK 1.1 | 10.15 MB | 1.1 |