#Latest Network Switch Firmware Required to use the app
J-Tech Digital ® is focused on providing high-quality products that integrate and distribute home entertainment for the residential and commercial markets. J-Tech Digital ® has played a major role in transforming whole-house audio/video and home theater.
Three Woking modes
Three modes includes point-to-point, point-to-many & many-to-many. For point-to-point mode, HDMI signal can be extended up to 120m (394ft) over a single Cat5E/6 cable.
Any-to-Any Broadcasting
Extend your HDMI signal from any source to any receiver can never be too easy. By configuring J-Tech Digital customised gigabit network switch (JTECH-EX-120M-UN-S), you can stream your HDMI signal to one receiver or many receivers; also, receiver can pick the signal from any of the transmitters. The network switch can be cascaded to form a many-layer network to support a large HDMI extender system.
Standard TCP/IP Protocol
HDMI signal is repacked into IP packets. Each receiver and transmitter has a unique IP address which you can manually set by logging into their web GUIs.
Firmware can be downloaded from the product page:
https://www.jtechdigital.com/j-tech-digital-r-proav-r-unlimited-n-x-n-hdmi-extender-matrix-switch-switcher-extender-by-single-ethernet-cable-up-to-400ft-network-switch.html
Feel free to reach us to make suggestions:
Author: Shitao Wu
E-mail: [email protected]
J-Tech Digital HDMI N2N Matrix is an Android Tools app developed by J-Tech Digital, Inc and published on the Google play store. It has gained around 1000 installs so far, with an average rating of 4.0 out of 5 in the play store.
J-Tech Digital HDMI N2N Matrix requires Android with an OS version of 4.0 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. J-Tech Digital HDMI N2N Matrix is an Android app and cannot be installed on Windows PC or MAC directly.
Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.
Below you will find how to install and run J-Tech Digital HDMI N2N Matrix on PC:
If you follow the above steps correctly, you should have the J-Tech Digital HDMI N2N Matrix ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.
| J APK 1.0 | 2.19 MB | 1.0 |
RELATED APPS
