Uses the built in magnetometer to show the magnetic field near the Android phone or tablet. Three metering speeds: Fast, Medium, Slow plus Zero offsets, two scales.
Use as a metal detector: pass the Android over a ferrous metal object and observe the needle behaviour.
For example, to test the app, hold your phone near a loudspeaker. Some metals, like Aluminium and Stainless Steel, are not magnetic.
The accuracy of the meter is determined by phone hardware.
FAQ:
Q: What do the speeds mean?
A: Fast, medium, slow refer to how quickly the meter needle moves in response to a change in the magnetic field.
Q: What is "zeroed"?
A: Zeroed and unzeroed are for looking at the difference between the value when the button was pressed and now ... For example, if you are in unzeroed mode, and the meter reads 50, then you press the button the meter will now read zero, effectively subtracting 50 from the reading.
Q: What are "coarse" and "fine"?
A: Coarse and fine refer to the meter scale ... One reads from zero to 50 microTesla, the other to 500 microTesla. The Earth's magnetic field is around 30 microTesla.
Metaloid Field Detector is an Android Tools app developed by jjbunn and published on the Google play store. It has gained around 50000 installs so far, with an average rating of 3.0 out of 5 in the play store.
Metaloid Field Detector requires Android with an OS version of 3.0 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. Metaloid Field Detector is an Android app and cannot be installed on Windows PC or MAC directly.
Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.
Below you will find how to install and run Metaloid Field Detector on PC:
If you follow the above steps correctly, you should have the Metaloid Field Detector ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.
Metaloid Field Detector APK 2.3 | 438.09 KB | 2.3 |