erminesoft logo
Go

LED Control [ROOT] for PC

Published by  KDB
  • Category
    Tools
  • Developer
    KDB
  • Downloads
    100000+
  • Android Version
    4.3 and up
  • Content Rating
    Everyone
LED Control [ROOT] PC screenshot 1LED Control [ROOT] PC screenshot 2LED Control [ROOT] PC screenshot 3

Turn your phone's LED into a charging indicator!

*Does NOT support Samsung/LG/Asus/others phones. Only for Motorola devices.*

Didn't know that your Nexus 6/Moto X has an LED? You'll be hooked!
Use this app to select kernel specific "charging triggers" for the device's LED which will make it light up when plugged in depending on the specific charging triggers.

*** REQUIRES ROOT ACCESS ***

• SUPPORTED DEVICES:

· Motorola Google Nexus™ 6
· Motorola Moto™ X (2013)
· Motorola Moto™ G (2013)
· Motorola Moto™ E
· Motorola Droid™ MAXX/Ultra

• UNSUPPORTED DEVICES:

· Motorola Moto™ X2/G2
· Non - Motorola devices

This app MIGHT work on your MOTOROLA device even if it is not listed here, although it is not recommended to be installed on devices other than those in the Supported Devices list, because those are the devices on which it has been tested.

Please understand that if it doesn't work on your device I cannot magically make it work (eg. Moto X 2nd Gen.) and refrain from leaving poor ratings. Thank you.


• FEATURES:

· Clean, simple, Material Design inspired UI
· Brightness Slider: Control your 'charging' LED's brightness while charging, if your device supports it. Currently works only on Moto X and Nexus 6.
· Set On Boot: Automatically sets the last chosen trigger on a reboot, since the values are reset each time the kernel restarts. Available in Pro version only.
· LED Color: Choose between 3 LED colors if your device supports it (Nexus 6, Droid Ultra, Moto X). Available in Pro version only.

NOTE: This feature is still in development and the implementation is not perfect, so you may encounter bugs. If so, kindly report them to [email protected] instead of leaving bad ratings. Thank you!


• AVAILABLE TRIGGERS: (Varies by device)

· While Charging
· While Charging through Adapter
· Battery Full
· While Charging or Battery Full
· While Charging (Blnking) or Battery Full
· While connected to USB
· When Bluetooth is enabled
· When Display is on
· On Internal Storage I/O Activity
· On External Storage I/O Activity
· When flashlight (rear LED) is on
· When camera flash (rear LED) is on
· Always on


*** THIS APP REQUIRES ROOT ACCESS TO WORK ***
*** If you haven't heard of root access your device is probably not rooted ***


Support: http://forum.xda-developers.com/android/apps-games/4-3-led-control-motorola-devices-t3036823


This app is open source! Grab it here : https://github.com/KDB223/LEDControl


• DISCLAIMER:
This app has the potential of blocking your notification LED if you use a Moto G/ Moto E (a separate LED blinks just beside the dedicated charging LED but you might not notice it).
Please be aware that I (KDB), nor Google Inc. nor anyone but you yourself are responsible for the consequences of you missing an important notification due to this app.


Send your feedback about this app to [email protected]


· "Nexus" is a registered trademark of Google Inc.
· "Moto" is a registered trademark of Motorola Mobility LLC
· "Droid" is a registered trademark of Lucasfilm Ltd. and a registered brand name of Verizon Wireless

How to Install LED Control [ROOT] for Windows PC or MAC:

LED Control [ROOT] is an Android Tools app developed by KDB and published on the Google play store. It has gained around 100000 installs so far, with an average rating of 3.0 out of 5 in the play store.

LED Control [ROOT] requires Android with an OS version of 4.3 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. LED Control [ROOT] is an Android app and cannot be installed on Windows PC or MAC directly.

Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.

Below you will find how to install and run LED Control [ROOT] on PC:

  • Firstly, download and install an Android emulator to your PC
  • Download LED Control [ROOT] APK to your PC
  • Open LED Control [ROOT] APK using the emulator or drag and drop the APK file into the emulator to install the app.
  • If you do not want to download the APK file, you can install LED Control [ROOT] PC by connecting your Google account with the emulator and downloading the app from the play store directly.

If you follow the above steps correctly, you should have the LED Control [ROOT] ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.

Download LED Control [ROOT] For PC

LED Control [ROOT] APK 1.3.5835.19 KB1.3.5

RELATED APPS