Make your USB Oscilloscope portable with this App.
Supported hardware:
- HS101 (DIY Oscilloscope http://hscope.martinloren.com/HS101-oscilloscope.html)
- Hantek 6022BE/BL
- SainSmart DDS120 / Rocktech BM102
- Voltcraft DSO2020
- ARMFLY AX-Pro
- Hantek PSO2020
- Hantek 1008
- Hantek iDSO1070
- Instrustar ISDS205A
Free Version:
- Limited sampling rates
- 1 Channel
- Trigger: slope selector, manual/auto level, software wave stabilizer
- 500 samples
- Refresh rate limited to 4 FPS
- Basic statistics (Min, Max, Vpp, Avg, RMS)
- Linear Interpolation between samples
- Voltmeter and Dalogger demo
- Can take screenshot
Full Version (please DO NOT purchase if the Free version doesn't work):
- 2 Channels
- Max Visible Frequency (at 48MSa/s): 12MHz (with Sinc Interpolator), 24MHz for FFT
- Acquire 1000 samples
- Roll mode with 4000 samples
- Refresh rate: up to 20FPS (depending on phone performance)
- AC/DC (Software if device has not)
- Auto-voltage
- Single Trigger
- Ruler for manual measures (time/frequency)
- Power Spectrum Estimation using the FFT
- Possibility to select data windows for FFT
- Sinc Interpolation between samples
- Export Scope data in CSV format (include Matlab data)
- XY Plot
- Data Logger
- Calibration
Unofficial App for USB oscilloscopes. The author decline any responsibility or liability for any damage, problem or analysis error resulting from the usage of this software.
Quick Guide on the developer website (see under).
PAY ATTENTION: it requires USB OTG support on your phone and one of the listed oscilloscopes. Check the developer website (down) for more info.
BETA VERSION: For joining to the Beta Test follow this activation link: https://play.google.com/apps/testing/com.martinloren.hscope
ALPHA VERSION: send me an email.
NEWS on Development: https://twitter.com/MartinLoren8
HScope is an Android Tools app developed by MartinLoren and published on the Google play store. It has gained around 10000 installs so far, with an average rating of 4.0 out of 5 in the play store.
HScope requires Android with an OS version of 4.0 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. HScope is an Android app and cannot be installed on Windows PC or MAC directly.
Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.
Below you will find how to install and run HScope on PC:
If you follow the above steps correctly, you should have the HScope ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.
| HScope APK 2.1.4 | 5.43 MB | 2.1.4 |
RELATED APPS
