The application allows you to display data from various electronic vehicle blocks using the ELM327 OBDII adapter, display graphics in real time, and also save them and view them later, shows and Resets engine fault codes / DTC trouble codes.
Supports Bluetooth ELM327 and Wi-Fi ELM327 OBD adapters.
It is better to use adapters V1.5, to V2.1 a lot of complaints about incorrect work.
Attention!
ELM327 chips work only with cars with OBD2 support:
Cars manufactured in the USA since 1996,
In the Europe countries since 2001. (gasoline cars) and since 2003. (diesel),
In Japan, since ~ 2001.
In addition to standard OBDII parameters, special ones are supported, for different
car brands, the following options are now available:
BYD - 53 Items
Chery - 18 (DELPHI)
Citroen - 80 (C4,C5,Sagem2000)
Ford - 39
GM/Opel/Pontiac - 74
Honda - 26 (Fit, Accord)
KIA, Hyundai - ~15 for each model(ATF Temperature, Knock detected and etc)
Mitsubishi - 319 (CAN, MUT, MUT GDI)
Nissan - 423 (CAN,CONSULT2)
Renault - 185 (CAN, KWP, Sagem2000)
SsangYong - 47
Toyota - 466 (CAN, KWP, Prius)
VAZ - 172 (Yanvar 7.2, Itelma VS5.1 R83, Itelma M73, Itelma M74 KWP/CAN)
The list of models and parameters will be updated...
Not all PIDs from the list for a certain car brand can be supported by your car, for convenience you can select the types of the required PIDs in the "Settings / PID types"
For certain brands of cars (currently some Mitsubishi models), have the ability to control various systems (turn on a cooling fan, a gasoline pump, etc.)
To read the MUT parameters and control the actuators on Mitsubishi models with CAN bus(Montero/Pajero IV, Outlander 2, etc.), you need to create a profile with the ISO 9141-2 protocol, and in the remaining profiles (for reading CAN parameters) leave the protocol ISO 15765-4 CAN (11bit 500K) or automatically.
So there are ample opportunities for creating your own parameters.
CarBit ELM327 OBD2 is an Android Auto & Vehicles app developed by MDA VRP and published on the Google play store. It has gained around 10000 installs so far, with an average rating of 4.0 out of 5 in the play store.
CarBit ELM327 OBD2 requires Android with an OS version of 3.1 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. CarBit ELM327 OBD2 is an Android app and cannot be installed on Windows PC or MAC directly.
Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.
Below you will find how to install and run CarBit ELM327 OBD2 on PC:
If you follow the above steps correctly, you should have the CarBit ELM327 OBD2 ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.
| CarBit ELM327 OBD2 APK 3.2.4 | 4.71 MB | 3.2.4 |
| CarBit ELM327 OBD2 APK 3.1.8 | 4.71 MB | 3.1.8 |
RELATED APPS
