Communication between mobile devices and flight control boards can be achieved through Bluetooth, you can use mobile devices to set the parameters of the flight controller.APP currently only supports Bluetooth Low Energy Module. Not only for SpeedyBee Bluetooth Module, we can also try to connect with other Bluetooth Low Energy devices, like HC-08, HM-10, etc, but if using the Speedy Bee Bluetooth-UART Adapter, this Bluetooth module will deactivate and activate automatically according to the status of the drone(armed/disarmed), no Bluetooth signal interference during the flight.
Flight Controller Requirements:
Betaflight firmware version ≥ 3.1.0
iNav FC version ≥ 1.8.1
Butterflight firmware version ≥ 3.1.0
System Requirements : Android 4.3 +
Instructions for use:
1.Connect the Bluetooth PCB with the UART interface of the Flight Controller, or use the flight controller integrated Bluetooth.
2.Open the Betaflight Configurator, on the Ports tab, open the Configuration/MSP port of the Bluetooth PCB, for the Bluettooth module of BLE4.0, 19200 is the recommended baud rate value.
3.Open the APP, connect the Flight Controller via Bluetooth, and you can adjust the parameters now.
Notes:
1.Currently Betaflight/iNav/Cleanflight configurator supported.
2.support BLE(Bluetooth Low Energy)/OTG-USB.
Speedy Bee is an Android Tools app developed by RunCam Co.,Ltd. and published on the Google play store. It has gained around 10000 installs so far, with an average rating of 4.0 out of 5 in the play store.
Speedy Bee requires Android with an OS version of 4.3 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. Speedy Bee is an Android app and cannot be installed on Windows PC or MAC directly.
Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.
Below you will find how to install and run Speedy Bee on PC:
If you follow the above steps correctly, you should have the Speedy Bee ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.
RELATED APPS
![[root] FlashFire icon](https://cdn.tarskitheme.com/eu.chainfire.flash-logo.png){kind=logo}
