erminesoft logo
Go

Satellite - SatFinder app for PC

Published by  BestMarket
  • Category
    Tools
  • Developer
    BestMarket
  • Downloads
    10000+
  • Android Version
    4.0 and up
  • Content Rating
    Everyone
Satellite - SatFinder app PC screenshot 1Satellite - SatFinder app PC screenshot 2Satellite - SatFinder app PC screenshot 3

SatFinder (Satellite Finder) is a tool which will help you to set up satellite dish. It will give you azimuth, elevation and LNB tilt for your location (based on GPS) and chosen satellite from list. The result is shown both as numeric data and graphical on google maps. It has also built in compass which will help you to find proper satellite azimuth. It also can use augmented reality to show where is satellite on camera view.

Compass works only on devices with compass sensor (magnetometer).


How to use this app:

1. First of all, you should enable GPS and Internet on your phone. Remember – in most cases it is impossible to receive GPS signal inside buildings. So if you want to get very accurate location – please go near windows or go even outside.

In current app version location should be found quite immediately. So if you stuck with ‘no location’ message please make ensure that you got enabled all required features/permissions.

2. If app found your location, you must select desired satellite. To do this you must find icon with magnification glass and tap it. On the list you will find all satellites with elevation angle above zero degrees. Remember: satellite name doesn’t affect the calculation of angles. Important thing is satellite position.

3. The azimuth, elevation and skew angle is calculated for your location and chosen satellite. Under calculated values there is a compass with graphical representation of azimuth angle. The azimuth angle is calculated with magnetic inclination. Remember – every time you use compass – you should calibrate it. Green line represents your phone azimuth. So if on compass green and red indicators are on each other – front of the phone should show you direction to the satellite. If the compass value is correct – phone azimuth value will go green.

How to Install Satellite - SatFinder app for Windows PC or MAC:

Satellite - SatFinder app is an Android Tools app developed by BestMarket and published on the Google play store. It has gained around 10000 installs so far, with an average rating of 4.0 out of 5 in the play store.

Satellite - SatFinder app requires Android with an OS version of 4.0 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. Satellite - SatFinder app is an Android app and cannot be installed on Windows PC or MAC directly.

Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.

Below you will find how to install and run Satellite - SatFinder app on PC:

  • Firstly, download and install an Android emulator to your PC
  • Download Satellite - SatFinder app APK to your PC
  • Open Satellite - SatFinder app APK using the emulator or drag and drop the APK file into the emulator to install the app.
  • If you do not want to download the APK file, you can install Satellite - SatFinder app PC by connecting your Google account with the emulator and downloading the app from the play store directly.

If you follow the above steps correctly, you should have the Satellite - SatFinder app ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.

Download Satellite - SatFinder app For PC

Satellite APK 1.01.88 MB1.0