An IR Remote Tester Control sends out a signal using Infrared light. You cannot see this light with your eyes, but by using a camera app with filter you can see the signal.
To check if your IR Remote is sending a signal, follow the steps below:
Pick a device to use:
>Turn the IR Remote Tester app on.
>After open of the IR Remote Tester app.
>Point the end of the remote control with the IR emitter.
>Look at the viewfinder or LCD screen.
>Press and hold one of the buttons on the remote control.
>If the remote control is sending a signal, you should see a light in the viewfinder or cell phone screen when you press buttons on the remote control.
> If the transmitter is visible
The remote control is normal.
>If the transmitter is not visible
The battery is dead or the remote control may be damaged.
>Depending on whether the transmitter is visible or not, follow the instructions below:
If the light of the remote control transmitter is not visible when any button is pressed, there is a possibility the batteries are spent. Switch to new batteries and check whether or not the transmitter lights up.
>>NOTE: Insert a battery consistent with the + pole and - pole according to the indication.
If the symptoms do not improve, the remote control may be broken.
You can also test each of the buttons on the remote by pressing them one at a time and checking to see if you see a light from the emitter.
>>NOTE: If you see a light when no button is pressed, one of the buttons on the remote may be >stuck and preventing other buttons from working. If this is the case:
>Remove the batteries.\n
>Press and release each button a couple of times to see if you can free the stuck button.
>Replace the batteries and test the remote again.
>If you continue to see a light when no button is pressed, the remote control may need to be replaced.
>If it does not light up when its specific button is pressed, the button may be broken.
Feature :
remote tester
remote testing app
remote test
tv remote tester
ir remote tester
ir blaster check
Ir sensor check
Check ir remote control
test your remote control batteries
test your remote control batteries
test remote control
ir remote test
Share IR Remote Test app in your circle
IR Remote Test - IR Blaster Check is an Android Tools app developed by Techer City and published on the Google play store. It has gained around 10000 installs so far, with an average rating of 4.0 out of 5 in the play store.
IR Remote Test - IR Blaster Check requires Android with an OS version of 4.0.3 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. IR Remote Test - IR Blaster Check is an Android app and cannot be installed on Windows PC or MAC directly.
Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.
Below you will find how to install and run IR Remote Test - IR Blaster Check on PC:
If you follow the above steps correctly, you should have the IR Remote Test - IR Blaster Check ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.
| IR Remote Test APK 1.0 | 1.66 MB | 1.0 |
RELATED APPS
