Use your smartphone or tablet as a wireless barcode scanner for your PC, Mac or Linux box. The scanned bar-codes are immediately available for further processing via a Bluetooth, TCP/IP or WebSocket connection.
FIRST STEPS
This app is a cost-saving alternative to handheld wireless/cordless/radio barcode scanners; it quickly and reliably scans all common linear and 2D bar-codes. Installation and use of Wireless Barcode Scanner is very simple. Just start the app, establish a connection with your computer and scan barcodes remotely with a single tap.
USE
Bar-codes are detected and decoded quickly. The scanned barcodes are stored in the history on the device. Batch mode for bulk scanning is supported. Wireless Barcode Scanner provides prefix and suffix configuration and an adjustable character set for decoding barcodes. The app notifies you about the current connection status to the target system and shows failed barcode-scans immediately.
FREE DEMO
This is a free demo version. It replaces barcode data with a demo text on an irregular basis. All other features are identical to the full version (market://details?id=com.tecit.android.bluescanner.full). Please contact [email protected] for volume or enterprise licensing (installation without Google Play).
INTERFACES
Wireless Barcode Scanner communicates via Bluetooth, TCP (server and client mode) or WebSockets with remote systems:
BLUETOOTH
The app can be operated as Bluetooth Master supporting the serial port profile (Bluetooth SPP). Once connected to the computer, the barcode data can be received via a virtual serial port (RS232 or COM-port).
TCP/IP
You can also configure Wireless Barcode Scanner to use TCP/IP for communicating with a remote system. TCP server and TCP client mode are supported.
WEBSOCKET
Finally, Wireless Barcode Scanner can operate as a WebSocket server. A suitably created HTML5 page is able to communicate with the app easily.
FEEDBACK AND SUPPORT
We highly appreciate your feedback! For questions or suggestions please contact [email protected].
Wireless Barcode-Scanner, Demo is an Android Tools app developed by TEC-IT and published on the Google play store. It has gained around 10000 installs so far, with an average rating of 3.0 out of 5 in the play store.
Wireless Barcode-Scanner, Demo requires Android with an OS version of 4.0 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. Wireless Barcode-Scanner, Demo is an Android app and cannot be installed on Windows PC or MAC directly.
Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.
Below you will find how to install and run Wireless Barcode-Scanner, Demo on PC:
If you follow the above steps correctly, you should have the Wireless Barcode-Scanner, Demo ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.
| Wireless Barcode APK 3.2.0 | 4.43 MB | 3.2.0 |
RELATED APPS
