CCNA Routing Labs lite version include 54 CCNA Labs for free use , when you upgrade to premium , you can use total 73 Labs !
IP Service : DHCP /NAT /ACL/ VRRP / HSRP / IP SLA / GLBP / PPP / NTP
Routing Protocols : EIGRP / OSPF / RIP / BGP / Tacacs+ / Radius / Telnet / SSH / L2 , L3 EtherChannel for PAgP and LACP
Hello, everyone: If you find any program bugs, or any Lab content error ,please mail to [email protected] , thank you!
(1) IP Service 1 : (free use)
Dynamic NAT
Static NAT
PAT
Extended ACL
Standard ACL
Name ACL
Time ACL
IPv6 ACL(1)
IPv6 ACL(2)
(2)IP Service 2 : (free use)
VRRP (track on serial)
HSRP (track on serial)
VRRP/IP SLA (track on ethernet)
HSRP/IP SLA (track on ethernet)
GLBP(Gateway Load Balance Protocol)
DHCP server
DHCP relay
Enable NAT on DHCP router
DHCPv6 auto config
(3)IP Service 3 : (free use)
DHCPv6 stateless
DHCPv6 stateful
PPP CHAP authentication
PPP PAP authentication
PPP multilink
GRE tunnel
NTP
NTP authentication
(4)IP Routing 1: (free use)
EIGRP manual summary
EIGRP unequal cost load balance
EIGRP passive interface
EIGRPv6
EIGRP authentication
EIGRPv6 authentication
EIGRP redistribution OSPF Route
EIGRP redistribution RIP Route
EIGRP redistribution static Route
(5)IP Routing 2: (free use)
OSPF normal area
OSPF stub area
OSPF totally stub area
OSPF NSSA area
OSPF totally NSSA area
OSPF virtual link
OSPFv3 (OSPF for IPv6)
OSPF authentication (by area)
OSPF authentication (by interface)
(6)IP Routing 3: (Free / Premium )
OSPF route summary on ABR (Free)
OSPF route summary on ASBR (Free)
OSPF redistribution RIP route (Free)
OSPF redistribution static route (Free)
RIP route filter (Free)
OSPFv3 virtual link (Premium)
Policy base route (Premium)
RIPng (Premium)
Inter VLAN Routing (Premium)
(7)IP Routing 4: (Premium only)
BGP authentication (Premium)
BGP local preference (1) : config global (Premium)
BGP local preference (2) : config network prefix (Premium)
BGP MED (Premium)
BGP neighbor (Premium)
BGP neighbor use loopback interface (Premium)
BGP summary address (Premium)
(8)Switch 1: (Free / Premium )
Tacacs+ on switch (Free)
Tacacs+ on router (Free)
Radius on switch (Premium)
Radius on router (Premium)
Reset router (Premium)
Reset switch (Premium)
Config Telnet (Premium)
Config SSH (Premium)
Restricted IP access (Premium)
(9)Switch 2: (Free / Premium )
L2 EtherChannel PAgP (Free)
L3 EtherChannel PAgP (Free)
L2 EtherChannel LACP (Premium)
L3 EtherChannel LACP (Premium)
Keyword:
CCNA,CCENT,CCNP,CCIE,Routing Switching,CCNA Lab,CCNA Labs,Cisco Lab,Cisco Labs
100-105 ICND1,200-105 ICND2,200-125 CCNA,300-101 ROUTE,300-135 TSHOOT,300-115 SWITCH
CCNA Labs Routing Lite is an Android Education app developed by Jerry 2015 and published on the Google play store. It has gained around 10000 installs so far, with an average rating of 4.0 out of 5 in the play store.
CCNA Labs Routing Lite requires Android with an OS version of 4.0.3 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. CCNA Labs Routing Lite is an Android app and cannot be installed on Windows PC or MAC directly.
Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.
Below you will find how to install and run CCNA Labs Routing Lite on PC:
If you follow the above steps correctly, you should have the CCNA Labs Routing Lite ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.
| CCNA Labs Routing Lite APK 2.2.13 | 33.71 MB | 2.2.13 |
RELATED APPS
