Spur Gear Calculator
This collection of calculators have been developed by SpiralArm Consulting Limited and Gear Services (Letchworth) Limited as a collection of gear data calculators that can be used to calculate the Outside Diameter, Centre Distance and Ratio of spur gears and pinions. It should be noted that these calculators should ONLY be used for spur gears and pinions, NOT for helical gears.
This app was initially developed for use with the spur gears and pinions available via the Ultrascale web site. However, it can be used for spur gears and pinions from other sources.
Gear Systems
The two gear systems used in this app are Diametral Pitch and Module and assume you are using standard full depth-teeth. When switching gear systems the calculators will also convert the currently set tooth size to the new gear system. For example if you have the calculators set for Diametral Pitch and the Tooth Size set to 100 and you then change the gear system to Module the 100 will be converted to Module (i.e. 0.254) and the reverse also applies.
Outside Diameter Calculator
This calculator is used to calculate the outside diameter of a spur gear. The outside diameter that the calculator returns is for the gear at the correct size.
Centre Distance Calculator
This calculator is used to calculate the centre distance between two mating spur gears. The centre distance that the calculator returns is for the two gears in tight mesh.
Ratio Calculator
This calculator is used to calculate the ratio between two mating spur gears.
Persistent input data
The input data for all the calculators can be saved for later use. Along with the option to preset the Gear System, Tooth Size and Number of Teeth. Access to both the preset data and persistent data is via the top toolbar in the individual calculator.
The top button bar options are as follows:
'Default' - This loads the input data fields with the data preset in the 'Data Entry Defaults' section of the app.
'Select' - This displays a list of input data saved using the 'Save' option. This input data can then be loaded into the input data fields by clicking on it.
'Save' - This saves the currently displayed input data for later use, by using the 'Select' option.
'Copy to' Menu
The 'Copy to' menu is active once the current calculation is done and result displayed for that calculator. This menu allows your to copy the results displayed in the current calculator with the other calculators and their applicable fields without the need to manually enter it.
Gear Calculator is an Android Tools app developed by SpiralArm Consulting Limited and published on the Google play store. It has gained around 10000 installs so far, with an average rating of 3.0 out of 5 in the play store.
Gear Calculator requires Android with an OS version of 4.3 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. Gear Calculator is an Android app and cannot be installed on Windows PC or MAC directly.
Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.
Below you will find how to install and run Gear Calculator on PC:
If you follow the above steps correctly, you should have the Gear Calculator ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.
| Gear Calculator APK 1.0.0 | 12.74 MB | 1.0.0 |
RELATED APPS
