Wakebox allows you to remotely power on your Xbox One in order to enable Xbox One streaming to your Windows 10 PC from anywhere!
You must know your Public IP and Xbox One's Console/Live ID in order to use this app. Additionally, this app requires some home network configuration changes (Port Forwarding) in order to work.
You can find your IP simply by googling "what is my IP" on your home network.
The Console ID can be found on your Xbox One under Settings -> All Settings -> System -> Console Info & Updates
Please feel free to email any feedback, issues, or suggestions that you have!
DIRECTIONS:
In order to use this app to turn your Xbox One on remotely, you'll first need to setup your home network to allow you to connect remotely. You'll need to make sure that your Xbox is set to Instant On mode. You can set this in Power & Startup -> Power Mode & Startup.
Then set your Xbox so that it either uses a static IP or that your router reserves an IP for your Xbox. You\'ll need to forward various ports in order to power and stream your Xbox remotely:
Port 5050
Port 4838
Ports 49000-65000
Make sure to forward all of these ports to the Xbox's assigned IP address.
Each Xbox has a unique identifier that is required to power on the Xbox remotely.
You can find this information in: Settings -> All Settings -> System -> Console Info & Updates -> Console ID
Finally you will need your public IP so that you can connect to your home network remotely. This can be easily done by doing a Google Search while on your home network for "what is my ip".
Sometimes your home network will rotate public IP addresses depending on your ISP. If this is the case, you may be able to set up your home network to report its public IP address to a service such as No-Ip.com or similar alternatives. Feel free to search online for more information.
Additionally, there is plenty of guides online that are more verbose and explicit than the instructions included in this app to help you get you setup to stream your Xbox remotely. Feel free to seek further help from those guides if you are having trouble getting set up! A good one to get started with can be found here: https://kinkeadtech.com/how-to-stream-xbox-one-to-windows-10-from-anywhere-with-internet/
*PLEASE NOTE*
This app will only work provided you've setup your home network according to the above instructions or various online guides to enable the ability to stream your Xbox One remotely from the Windows 10 Xbox App. This requires setting up port forwarding on your home router.
I assume no responsibility for any issues related to the initial home network setup process. Please, proceed at your own will.
Wakebox for Xbox One is an Android Tools app developed by William Kranich and published on the Google play store. It has gained around 10000 installs so far, with an average rating of 3.0 out of 5 in the play store.
Wakebox for Xbox One requires Android with an OS version of 4.0 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. Wakebox for Xbox One is an Android app and cannot be installed on Windows PC or MAC directly.
Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.
Below you will find how to install and run Wakebox for Xbox One on PC:
If you follow the above steps correctly, you should have the Wakebox for Xbox One ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.
| Wakebox for Xbox One APK 1.1.1 | 11.4 MB | 1.1.1 |
RELATED APPS
