erminesoft logo
Go

Torque Plugin for PROTON cars for PC

Published by  SAUKintelli
  • Category
    Auto & Vehicles
  • Developer
    SAUKintelli
  • Downloads
    10000+
  • Android Version
    3.2 and up
  • Content Rating
    Everyone
Torque Plugin for PROTON cars PC screenshot 1Torque Plugin for PROTON cars PC screenshot 2Torque Plugin for PROTON cars PC screenshot 3

This is a Torque plugin for Malaysian made Proton cars, particularly for Campro engines older than 2010. Read real time data, read error codes.!!

This is the free version with limited sensors/parameters and features. More parameters (a lot more..!) and features are available in the paid version. Try this free version and if you like it, please buy the full version from Googleplay..!

In the meantime try this free version and please revert to me for issues. My email address as below.

Prerequisite:

1. This is a Torque plugin. You need to get Torque installed in your device. This plugin will NOT work alone.
2. You need ELM327 compliant adapter. Make sure you do not use ELM327 version 2.1 which does not support k-line communications. Get adapters confirmed to work from me or from ahmad hamidon (youu can get it from http://bit.ly/obd2malaysia ).
3. Please also make sure you follow the instruction below. And make sure connection to ECU is OK before scan error, erase error or check the status to avoid app crashes.


Important notes..!

Later versions of android, for saving battery life, there is phone setting to stop apps from starting automatically. Please ensure you have set this plugin to autostart. The same thing will need to be done if you have autostart manager in your device.

Typically, the settings are in battery settings of the device.



Installation procedures:

This plugin is for Proton cars. New vehicles with CFE engine does not require any setup. Vehicles with older CAMPRO and CPS engines are supported and requires special setup as below:

1. This plugin requires full access to OBD device. Check the 'Allow plugin full access' in Settings --> Plugins

2. Create a new vehicle profile in Torque. Under Menu, select 'Vehicle Profile'. then click 'create new profile'...,

3. Name the profile 'PROTON'. Scroll to the bottom and click 'Show advance settings'

4. Scroll to the bottom. In 'Preferred OBD Protocol' select 'ISO 14230(fast init,10.4baud)'

5. Click 'Save'

6. Create another vehicle profile and name it 'Blank' scroll to the bottom and 'Save'. Do not put any advanced settings

7. Select the Proton CPS vehicle profile you created earlier every time you want scan CAMPRO engines other than CFE by tapping on Menu --> 'Vehicle Profile'-->select the ones that you created. For other vehicles, use the 'Blank' profile.

8. Create custom PIDs from Settings --> Manage extra PID/Sensors --> tap settings and select 'Add predefined set'. Select 'Proton PIDs'.

9. Create displays in 'Realtime Information' by tapping Realtime Information --> go to empty page -->tap menu --> Add display -->pick your meter type --> Select PIDs that start with {PROTON}.

10. Make sure you go to this page every time you want to use PROTON cars. Otherwise, Torque wouldn't connect to your ECU. You may need to wait for a while for Torque to connect to your ECU

11. Now you are ready to use the Torque for scanning your car.

12. To scan error codes (or other features in the paid version), tap on this plugin logo (PROTON OBD). Please make sure connection to ECU is OK before scanning to avoid apps crashes

How to Install Torque Plugin for PROTON cars for Windows PC or MAC:

Torque Plugin for PROTON cars is an Android Auto & Vehicles app developed by SAUKintelli and published on the Google play store. It has gained around 10000 installs so far, with an average rating of 4.0 out of 5 in the play store.

Torque Plugin for PROTON cars requires Android with an OS version of 3.2 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. Torque Plugin for PROTON cars is an Android app and cannot be installed on Windows PC or MAC directly.

Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.

Below you will find how to install and run Torque Plugin for PROTON cars on PC:

  • Firstly, download and install an Android emulator to your PC
  • Download Torque Plugin for PROTON cars APK to your PC
  • Open Torque Plugin for PROTON cars APK using the emulator or drag and drop the APK file into the emulator to install the app.
  • If you do not want to download the APK file, you can install Torque Plugin for PROTON cars PC by connecting your Google account with the emulator and downloading the app from the play store directly.

If you follow the above steps correctly, you should have the Torque Plugin for PROTON cars ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.

Download Torque Plugin for PROTON cars For PC

Torque Plugin for PROTON cars APK 2.2.5923.39 KB2.2.5