Card Vibro Air2 for PC

Published by IMV CORPORATION

Category
Tools
Developer
IMV CORPORATION
Downloads
1000+
Android Version
3.2 and up
Content Rating
Everyone

[Note]
To use Version 1.6.5 or later, please update the firmware of your Air2 to Ver:124.
You can download the latest firmware from the URL below:
http://www.imv.co.jp/products/vibrograph/measure/air2/info01/index.php
Card Vibro Air2 is a WiFi portable vibrometer.
With the wireless connection, we can now safely measure the vibration of the
areas that had been difficult to access.

This vibrometer has the following functions:
1. Simultaneous Measurement - Displacement, velocity, acceleration, and
acceleration envelope for bearing assessment can be measured automatically
and simultaneously.
2. FFT Analysis - Frequency analysis can be done in the 12800dpi high
resolution.
3. Waveform Observation - Waveform of the vibration can be recorded.
4. Evaluation at the Site - Evaluation can be done according to the
international standards; vibration severity ISO10816 (JIS-B-0906), etc.
5. Continuous Monitoring - Waveform and FFT can be monitored in almost
real-time.
6. Route Setting - Measuring points are displayed in the order of being
programmed.
7. Data Saving - All data acquired can be stored.

Caution: A specific hardware is necessary to use this software.

How to Install Card Vibro Air2 for Windows PC or MAC:

Card Vibro Air2 is an Android Tools app developed by IMV CORPORATION and published on the Google play store. It has gained around 1000 installs so far, with an average rating of 4.0 out of 5 in the play store.

Card Vibro Air2 requires Android with an OS version of 3.2 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. Card Vibro Air2 is an Android app and cannot be installed on Windows PC or MAC directly.

Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.

Below you will find how to install and run Card Vibro Air2 on PC:

Firstly, download and install an Android emulator to your PC
Download Card Vibro Air2 APK to your PC
Open Card Vibro Air2 APK using the emulator or drag and drop the APK file into the emulator to install the app.
If you do not want to download the APK file, you can install Card Vibro Air2 PC by connecting your Google account with the emulator and downloading the app from the play store directly.

If you follow the above steps correctly, you should have the Card Vibro Air2 ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.

Download Card Vibro Air2 For PC

Card Vibro Air2 APK 2.6.11	1.4 MB	2.6.11