Hello.
Watch the video 15 seconds to understand how the application works.
How can you find/trace the wire in the wall? Here is a way.The application can determine the presence of an alternating current (50 Hz, not voltage!) In the unpaired, single wire for urban or industrial network. The scheme is shown at the top.
Current will be well-defined under a load of> 0.6 killo watts.
Using mentioned above wiring circuit, wire layout can be determined in the wall.
No matter, is the wire zero or phase - the main thing that the current should to flow through one..
The current may be less, but it is better if> 3A.
If one of cords has rupture in wall you always have one of them to pass through/energize it the current.
.................................................. .................
It is enough to see the 14 second video.
.................................................. .............
The application can scan the metal objects only if you use them as a ground for alternating current (50 Hz).
In double wiring , both wire current flow against each other. So standing wave can not be identified.
ATTENTION!
1. Be careful when handling electricity.
2. Not all phones have a magnetic sensor with sufficient frequency measurements.
I've used Samsung S4.
3. On appropriate alike Samsung S4,S5 phones it is needed to restart the app once right after installation.
Thank you.
Keywords: current, voltage, indicator, screw, screwdriver.
Current In Wire Scan Indicator is an Android Tools app developed by Samadjon and published on the Google play store. It has gained around 10000 installs so far, with an average rating of 2.0 out of 5 in the play store.
Current In Wire Scan Indicator requires Android with an OS version of 4.0 and up. In addition, the app has a content rating of Everyone, from which you can decide if it is suitable to install for family, kids, or adult users. Current In Wire Scan Indicator is an Android app and cannot be installed on Windows PC or MAC directly.
Android Emulator is a software application that enables you to run Android apps and games on a PC by emulating Android OS. There are many free Android emulators available on the internet. However, emulators consume many system resources to emulate an OS and run apps on it. So it is advised that you check the minimum and required system requirements of an Android emulator before you download and install it on your PC.
Below you will find how to install and run Current In Wire Scan Indicator on PC:
If you follow the above steps correctly, you should have the Current In Wire Scan Indicator ready to run on your Windows PC or MAC. In addition, you can check the minimum system requirements of the emulator on the official website before installing it. This way, you can avoid any system-related technical issues.
| Current In Wire Scan Indicator APK HalboiTar | 1.02 MB | HalboiTar |
RELATED APPS
